| Weather | Temperature | Sunshine | Precipitation | Wind | Pressure | Rel. humidity | Snow |
At Station Altitude (QFE) Reduced to Sea Level (QFF) Standard Atmosphere (QNH)
Atmospheric pressure at station altitude QFE [hPa]
Updated on 08.01.2009, 02.00
948.8
832.2
897.7
876.6
973.9
980.5
992.0
971.5
828.4
953.5
970.5
975.3
976.0
962.2
863.1
645.3
949.9
853.8
796.2
894.6
764.0
896.6
967.2
780.3
966.3
793.1
972.7
803.0
897.7
947.4
743.5
890.1
829.5
969.2
964.0
822.9
963.8
961.0
961.8
970.5
968.5
954.2
962.5
885.5
957.0
969.3
928.3
969.6
918.6
903.5
879.4
835.6
727.2
954.7
966.8
828.8
960.4
843.0
808.6
941.3
860.3
958.8
744.2
985.0
947.5
981.2
983.2
670.4
824.5
869.1
The are three types of air pressure available: the air pressure at station altitude (QFE), the pressure reduced to sea level (QFF) and the pressure reduced with standard atmosphere (QNH). QFF is only available for stations under 600 masl, QNH for stations under 2300 masl. The measured values shown are only partly checked and may include gaps.
General map of the whole of Switzerland
The general map shows a reference measured value for each region. The values shown represent the current air pressure at station altitude (QFE). Current values are updated every 10 minutes. If you click on a region you will see an enlarged image with further measuring stations.
General map of the whole of Switzerland with all stations
The values shown represent the current air pressure at station altitude (QFE). Current values are updated every 10 minutes. If you click on a station, you get a diagram showing the way the pressure has changed.
Region
Current values are updated every 10 minutes. If you click on a station, you get a diagram showing the way the pressure has changed. To go back to the general map, just click on the "All Switzerland" link.
Diagrams
The hourly average values of air pressure at station altitude (QFE) are shown. The diagram is updated once every hour and shows the values for yesterday and today. If you click on the "All Switzerland" link you go back to the general map and if you click on "Region" you go back to the region you were looking at.
If you are interested in further parameters, you can click on the relevant flag in the top toolbar. You will then go straight to the view mode you have selected at that time.
